1/2X12 Inch Assorted Belt Kit With 2 Leather Super Strops fits Original Work Sharp Knife and Tool Sharpener From Super Strop The 1/2X12 Super Strop Sharpening Belt Pack includes 2 Super Strop Leather Honing Belts, white and green sharpening compound, plus 4 Coarse sharpening belts (Two Each) 120 & 220 grit Flexible.

1/2X12 Inch Assorted Belt Kit With 2 Leather Super Strops fits Original Work Sharp Knife and Tool Sharpener

From Super Strop

• The 1/2X12 Super Strop Sharpening Belt Pack includes 2 Super Strop Leather Honing Belts, white and green sharpening compound, plus 4 Coarse sharpening belts (Two Each) 120 & 220 grit Flexible Ceramic and 4 Fine sharpening Belts (Two Each) 600 & 800 grit Silicon Carbide.
  
• This belt pack can take any knife and bring the edge back to razor sharp. Both Coarse and Fine grit sharpening belts are included to create your initial burr. The 1/2X12 Leather Honing Strop Belt will not only polish your knife’s edge to a fine finish, it will do a superior job of removing the final burr that was created while sharpening. Along with both compounds, you can tackle any sharpening or stropping job.
• Our flexible belts are made for the tight radius of the Original Worksharp machine’s rollers. You’ll find our belts are smooth running and offer consistent results. Coarse belts are flexible ceramic. Fine grit belts are silicon carbide, the professional sharpener’s choice for grit material.
• Premium Made in USA White & Green Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge. The addition of the Green Polishing Compound will allow you to get the finest looking edge.
• SUPER STROP LEATHER HONING BELT GUARANTEE | SUPER STROP Premium Leather Honing Belts are guaranteed against manufacturer defects, material defects & User Error. If your Leather Honing Belt overstretches, won't track straight, breaks or you accidentally or purposely cut the belt, we'll send an immediate replacement or give you a full refund. Leather is a natural product and can be unpredictable to work with, therefore we guarantee our leather honing belts from any imaginable defect.
  

Super Strops are quality leather belts for stropping with belt sanders. The 1/2X12 Leather Honing Strop Belt will not only polish your knife’s edge to a fine finish, it will do a superior job of removing the final burr that was created while sharpening. Super Strop Leather Strops are made for 1/2X12 Belt sanders like the Original Edition WorkSharp and virtually any belt sander that accepts 1/2X12 inch sanding or sharpening belts. A 1/2X12 Belt Sander can make a fast and convenient knife sharpener, and you don’t have to stop there. Sharpen knives, tools & chisels. Your leather belt may seem a little small when you install the strop on your 1/2X12 belt sander for the first time. The leather strop belts are made slightly shorter than traditional 1/2X12 sharpening belts to compensate for stretching over time. Once installed, Original Worksharp is a stropping machine. Your leather belt sharpening kit includes our exclusive Super Strop White Sharpening Compound, also referred to as buffing compound or rouge. The Sharpening Compound is specifically designed for powered leather strops. The compound should be applied as the belt as it runs on your sharpener or belt sander. The compound melts slightly from the friction and applies a very thin layer to the leather stropping belt. Because of the speed of the leather honing belt and cutting power of our compound, it only takes a small amount of compound to be effective. This reduces the amount of time between maintenance cleanings. After applying a thin layer of sharpening Compound to your leather strop, you can begin stropping a blade on your 1/2X12 belt sander. You must strop Edge Trailing. Super Strop Premium Leather Honing Belts are unconditionally guaranteed by Pro Sharpening Supply

Dynabrade (79202) Belt Assortment Pak

1X72 Super Strop Leather Honing Belt with 4 Pack Knife

1X30 Super Strop Leather Honing Belt with Knife Sharpening Belt kit! 10 Pack of 1x30 sharpening belts and Buffing Compound included. 1X30 Leather

1X30 Leather Honing Belt Super Strop with Assorted 10 Pack of Sharpening Sanding Belts

1X42 Inch Leather Honing Belt Super Strop Fits 1X42 Belt Sanders

SUPER STROP Leather Honing Belts for Powered Belt Sanders 1/2X12

Shop All – ProSharpeningSupply

The 1/2X12 Super Strop is designed to run on The Original Work Sharp Belt Sander. This Leather Honing Belt will take your knife's edge from SHARP

1/2 X 12 inch Leather Honing Super Strop Belt Fits Original Work Sharp Knife and Tool Sharpener

2X72 inch Super Strop Leather Honing Stropping Belt for 2X72 Belt

2X72 inch Super Strop Leather Honing Stropping Belt for 2X72 Belt

1/2X12 Super Strop – ProSharpeningSupply