Rack-A-Tiers 69705 Penguin Puller Jr
Price: $ 62.99
4.6(743)
The Penguin Puller Sr. and Jr. are revolutionary new tools designed to aid in easily pulling in large cables. The sleek, bullet shape allows for seamless pulling, no tape or crimps required. Utilizing four slots and allen-key set screws the Penguin Puller Sr. and Jr. are rated for 4,000 lbs of pull strength. These tools are the cool new kids on the block and there to stay when it comes to pulling wire!.
Penguin Puller - Wire Pulling attachment - Rack-A-Tiers Since 1995
Rack-A-Tiers Penguin Puller Jr. (69705) : Automotive
Penguin Puller - Wire Pulling attachment - Rack-A-Tiers Since 1995
Four Ton Break Load 0.5in. Pin Size
Rack-A-Tiers Flush Pin Shackle used with Penguin Pullers (69710)
Greenlee 31014 T-Basket-Type Pulling Grip, 6200-Pound Pulling Capacity - Electrical Pulling Grips
NorthEast Electrical
4,000 lbs. MAX PULL STRENGTH. 4 Wire Slots Attachment hole for Sr. & Jr. is .63 of an inch in diameter guin Puller Jr. – 2/0 to 4/0 Copper or Aluminum
Rack-A-Tiers Penguin Puller Jr. (69705)
Provides straight, clean path for wires with no obstructions. Brackets allow you to reduce friction and stress on wires being pulled through the holes due to the hole design. Reduce damage to floor joists, LVL's, and manufactured wood. Less opportunity for the wire to become damaged from crookedly drilled holes, sharp wooden edges, or wooden splinters. Patented design. Follows same guidelines as typical wire fill calculation. Leaves room for future expansion.
Rack-A-Tiers CC9024 Cable Chase - Wire Support Bracket
Rack-A-Tiers 41100 PulLee, Steel Roller for Wire Pulling This slim, but strong, steel roller fits in your box for smooth and controlled wire pulling. It effortlessly guides wire and cable into the feeding end of the job at the correct angle, eliminating the need for a second person to manually guide the feeding end.
Rack-A-Tiers Pullee - Steel Wire Pulling Roller (41100)
RACK-A-TIERS 69705 Penguin Puller Jr. -packaged
Rack-A-Tiers Laserline Kit w/CO2 Powered Gun, Spools & Darts Features: CO2 powered gun shoots a foam dart with a line attached to it. Fire the Laserline, attach your wire, then walk around and pull it across while standing. Accurately install a pull line up to 200ft. Includes 1 gun, 2 spools of line (1200 ft each), 2 darts, and 2 CO2 cartridges. Cuts labor costs and improves production. Ability to span over heavy and hard to move objects found in many commercial structures.
Rack-A-Tiers 83000 LaserLine Kit
Penguin Puller - Wire Pulling attachment - Rack-A-Tiers Since 1995