Cast-a-Mold Platinum Food Grade, Specialty Resin
Price: $ 14.00
4.6(620)
Cast-A-Mold Platinum is a food grade platinum (addition) cured silicone rubber used for a variety of applications. It exhibits an easy 1:1 mix ratio, low viscosity, excellent tear strength, tensile strength, elongation, heat deflection, and long library life. Cast-a-Mold Platinum can be used to make translucent rubber molds for casting candies, cakes, polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc.. It is user friendly, translucent, FDA compliant, and will cure at room temperature. Platinum cured silicone rubber can be heat accelerated. For example if you heat the mold at 150 f the cure time will be reduced from 8 hours to 30 minutes. Note: For food applications you will need to wash the cured mold with warm water and soap before using. Addition cured silicone rubber may be inhibited by certain contaminants resulting in tackiness on the surface of.
Cast-A-Mold Platinum is a food grade platinum (addition) cured silicone rubber used for a variety of applications. It exhibits an easy 1:1 mix ratio, low viscosity, excellent tear strength, tensile strength, elongation, heat deflection, and long library life. Cast-a-Mold Platinum can be used to make translucent rubber molds for casting candies, cakes, polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc.. It is user friendly, translucent, FDA compliant, and will cure at room temperature.
Platinum cured silicone rubber can be heat accelerated. For example if you heat the mold at 150 f the cure time will be reduced from 8 hours to 30 minutes.
Note: For food applications you will need to wash the cured mold with warm water and soap before using.
Addition cured silicone rubber may be inhibited by certain contaminants resulting in tackiness on the surface of the mold. Latex, sulfur based clays, tin cured silicone rubber, amines, nitriles, organo-metallic salt containing compounds should be avoided. If you are unsure of the compatibility of the substrate being molded a small test is recommended. To prevent inhibition it is usually helpful to coat the pattern with a clear acrylic lacquer or paint. Do not use polyurethane or latex.
Cast-A-Mold Platinum Food Grade Silicone Rubber (2 Gallons)
FOOD GRADE AND FDA-COMPLIANT: Create your own food-safe silicone molds with our Cast-A-Mold Platinum! It's food grade and FDA-compliant so you can use
Specialty Resin & Chemical Cast-A-Mold Platinum (10-Gallon Kit) | Silicone Mold Making Kit | Food Grade Platinum-Cured Silicone Rubber | 2-Part DIY
Poly-Optic® 1411 Clear Casting Resin - The Compleat Sculptor
RTV Silicone Rubber For Mold Making: 1 to 1 Mix Ratio, Food Grade
Craft Rubber Specialty Resin & Chemical
Cast-A-Mold 25T Silicone Rubber (1/2 Gallon)
Specialty Resin & Chemical Cast-A-Mold Platinum (2
Cast-a-Mold Platinum Food Grade Silicone Rubber
Silicone Mold Making Kit, Resin Epoxy Casting, Food Nepal
Cast-a-Mold Platinum Food Grade Silicone Rubber
FOOD GRADE AND FDA-COMPLIANT: Create your own food-safe silicone molds with our Cast-A-Mold Platinum! It's food grade and FDA-compliant so you can use
Specialty Resin & Chemical Cast-A-Mold Platinum (10-Gallon Kit) | Silicone Mold Making Kit | Food Grade Platinum-Cured Silicone Rubber | 2-Part DIY
CHT Group QM 260 Moldmaking Silicone-Gallon/Half Gallon Kit
TAP Platinum Silicone : TAP Plastics
FormX Webshop
