Simpson Strong-Tie Single 5-1/4-in x 9-1/2-in 14-Gauge G90

The SP1 and SP2 are designed as stud-to-plate connections to resist uplift. The SP1 is designed for sill-to-stud connections while the SP2 is for the double-top-plate-to-stud connection. These stud plate ties feature angled holes for a positive connection from the stud to the plates.

Simpson Strong-Tie SP2Z Stud Plate Tie

Simpson Strong-Tie Single 1-3/4-in x 11-7/8-in 18-Gauge G90 Galvanized Top Mount Joist Hanger in the Joist Hangers department at

C-C-2017 - Wood Construction Connectors, PDF, Screw

BA Beam Hanger Simpson Strong-Tie

Simpson Strong-Tie HGLTV Top-Flange Joist Hanger for 5-1/4 in. x 14 in. Engineered Wood HGLTV5.514 - The Home Depot

Simpson Strong-Tie IUS Galvanized Face-Mount Joist Hanger for 2-1/2 in. x 9-1/2 in. Engineered Wood IUS2.56/9.5 - The Home Depot

All hangers in this series have double shear nailing - an innovation that distributes the load through 2 points on each joist nail for greater strength. This allows for fewer nails, faster installation, and the use of all common nails for the same connection. Nails must be driven at an angle through the joist or truss into the header to achieve the table loads. Not designed for welded or nailer applications. Galvanized. 14-gauge.

Simpson Strong-Tie HHUS Joist Hanger

Simpson HU24-2 Face Mount I-Joist Hanger- G90 Galvanized – Fasteners Plus

The MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD screw anchor and Strong-Drive SDS Heavy-Duty Connector screws are included with the hanger.

Simpson MBHU5.50/11.25KT Masonry Beam Hanger w/Screws